Paint and Protect

 

Environmental Notification

Trade Notice No. 01/2010

Trade Notice No. 02/2010

Trade Notice No. 03/2010


TELE :2328607-16                                                                                  GOVERNMENT OF INDIA
GRAM: 'SAMAGRI'                                                                       MINISTRY OF DEFENCE (DGQA)

FAX No. 0512-2324748                                                                   CONTROLLERATE OF QUALITY
ASSURANCE (MATERIALS)
                                                                              POST BOX No. 229
KANPUR-208 00

No. CP/0503                       Dated : 07 Nov. 2005

 To

INDIAN PAINT
ASSOCIATION
6 NS ROAD
KOLKATA 700 001

INTRODUCTION OF MATT FINISH ACRYLATED ALKYD/SINGLE
PACK PU/SILICON ALKYD RESIN PAINTS

Dear Sir,

1.             We are in the process of up-dating the existing camouflaging paints with either Acrylated Alkyd or Single pack PU or Silicon Alkyd Paints. In this regard we have written to a few paint manufacturers & a copy of the letter No. even dated 25-1005 is enclosed here with.

2.             You are requested to disseminate the contents of the enclosed letter to the members of your association with a request to forward development sample, free of cost, to this Controllerate, with suggested QRs.

3.             An early action in the matter is requested.

Encl :- 5 sheets


(A K SINHA)
JOINT CONTROLLER
For CONTROLLER

Copy to:-
The Director of Quality Assurance (Stores)
Deptt. of Defence Production (DGQA/Stores-8)
Govt. of India, Min. of Defence
DHQ PO NEW DELHI-110 011

TELE :2328607-16                                                                                  GOVERNMENT OF INDIA
GRAM: 'SAMAGRI'                                                                       MINISTRY OF DEFENCE (DGQA)
FAX No. 0512-2324748                                                                   CONTROLLERATE OF QUALITY
                       ASSURANCE (MATERIALS)
POST BOX No. 229
KANPUR-208 004
No. CP/0503                                                                                              Dated : 25 Oct  2005

To,

M/s ASIAN PAINTS
6A, SHANTl NAGAR, 
SANTA CRUZ (E) MUMBAI-400055.

M/s BERGER PAINTS INDIA LIMITED
RPL HOUSE, 1 9, DDA COMMERCIAL COMPLEX
KAILASH COLONY EXTN.
NEW DELHI -110 048.

M/s JENSON& NICHOLSON (INDIA) LIMITED
7B, MIDDLETON STREET,
KOLKATA - 700 016 (WEST BENGAL)

M/s DYNACON CARES LTD.,
1 17/49-A, SARVODAYA NAGAR, 
KANPUR-208005.

M/s GISCO PAINTS
24, INDUSTRIAL ESTATE
ADHARTAL
JABALPUR 482 004

M/s. KANKOO PAINTS PVT. LTD.
760 B KHED SHIVAPUR
TALUKA HAVELl

PUNE-412205.

M/s PUNJAB PAINT COLOUR & VARNISH WORKS
123/946 FAZALGANJ
KANPUR-208012.

M/s PUSHKAR PAINT INDUSTRIES
BADRI SARRAF BHAWAN

B-92, SECTOR-C, MAHANAGAR
LUCKNOW - 2?6 006.

M/s SWASTIK ENTERPRISES
124^5, 'C GOVIND NAGAR,
KANPUR.


M/s YOHANAPAINTS
E-Z/100 ARERA COLONEY
BHOPAL-462016.

M/s GODDLESS NEROLAC PAINTS LTD., 
NEROLAC HOUSE GANPAT RAO KADAM MARG 
POST BOX No. 16322 LOWER PAREL 
MUMBAI-400013.

 

SUB : INTRODUCTION OF PAINTS

1.      It has been decided to introduce following shades of Paints for use in defence, with matt finish, Acrylated Alkyd/Single Pack PU Paints.

 

S. No.                        SHADES                                          ISC Std. No.

1.                        Grass Green/Olive Green                        218/220
2.                        Dark Brown                                            412
3.                        Light Olive Green                                     278
4.                        Middle Bronze Green                                223
5.                        Champagen                                             386
6.                        White                                                        -
7.                        Slate Grey                                              634
8.                        Orange Brown                                        439
9.                        Beige                                                    388
10.                        Light Stone                                          361
11.                        Middle Stone                                       362

2.                   You are requested to forward 4X50CT ml of the above Paints for Laboratory evaluation
expeditiously along with compatible undercoat/primer (500ml each).

3.                   The QRs of the paints are enclosed herewith.

Encl : As above (3 Sheets) 


(A K SINHA)
JOINT CONTROLLER
For CONTROLLER

Copy to:-

The Director of Quality Assurance (Stores)
Deptt. of Defence Production (DGQA/Stores-8)
Govt. of India, Min. of Defence
DHQ PO NEW DELHI-110 011

QRs OF MATT FINISH ACRYLATED ALKYD/SINGLE PACK PU / SILICON
ALKYDRBSIN PAINTS:

MATERIAL:

1.         The material shall be based on synthetic acrylic modified alkyd resin / single pack PU / Silicon Alkyd Resin Paint. The material shall be of such a composition as to satisfy the requirements mentioned below:

2.         The material shall be supplied in brushing consistency, and shall be capable of being thinned to spraying consistency by use of suitable thinner compatible with the composition.

3.         The material shall be free from hard setting, skinning and tendency to get. The material shall be in such a condition that smooth and uniform consistency is obtained easily by stirring.

 

 

TESTS

REQUIREMENTS

TEST METHOD

IS : 101

(a)

(i)

Consistency

Smooth & Uniform

Pt I/Sec 5 - 1989

 

(ii)

Efflux time at 30 C

By ford cup No. 4

70 100 Sec

Pt I/Sec 5 - 1989

(b)

 

Application

Shall be suitable for application by brushing (for spraying the paint may be thinned using suitable thinner)

Pt I/Sec 4 - 1987

(c)

 

Drying Time

 

 

 

(i)

Surface dry

15 Minutes Min.

Pt 3/Sec 1 - 1986

 

(ii)

Hard dry

Not more than 2 hrs.

 

 

(iii)

Tack free

Not more than 4 hrs.

 

(d)

(i)

Finish

Smooth and Matt.

Pt 3/Sec 4 - 1987

 

(ii)

Gloss Value Specular Gloss at 60

0 to 5 Units

Pt 4/Sec 4 - 1988

(e)

 

Fineness of Grind

50 Micron

Pt 3/Sec 5 - 1987

(f)

 

Colour

Close match to the specified IS colour shade

Pt 3/Sec 2 - 1989

(g)

 

Scratch hardness under a load of
1500 g (after 48 hrs.)

 

Bare metal shall not be visible through scratch

Pt5/Sec2-1988

(h)

 

Flexibility adhesion (0,25 mm mandrel)

No damage or detachment or cracking of the Mm when tested after 96 hrs. air drying

Pt5/Sec 2-1988

(i)

 

Protection against corrosion

The metal surface shall not show any sign of corrosion

Pt6/Sec 1-1988 Test panels to be exposed for 10 days

(k)

 

Flash Point (Abel)

That of suitable thinner

IS:101Pt1/Sec6-1987 (Reaffirmed 1999)

 

 

Water content %

0.5 Max

Pt5/Sec 2-1988

(l)

 

Lead restriction total lead compounds as PbO expressed as % of dry pigment

Not more than 1 %

Pt 8/Sec 5-1983

(m)

 

Accelerated storage stability Test

To Pass the Test

 

(n)

 

Mass in Kg/10 Litres

To be reported

IS:101 Pt 1/Sec 7-1988 reaffirmed

(o)

 

Resistance to acid

Shall pass the test

Annexure E of IS:2932-1993

(p)

 

Resistance to alkall

Shall pass the test

Annexure F of IS : 2932 1993

 

(q)

 

Resistance to Lubricating oil

The firm shall not show any blistering, appreciable change of colour & no penetration of film shall occur under a load of 1000 Gms.

Appendix-B

R

 

Resistance to petrol-benzol mixture

The firm shall not show any blistering, appreciable change of colour & no penetration of film shall occur under a load of 1000 Gms. (Scratch hardness test may be carried out after 2 Hrs. removing from the mixture.

Annexure C of IS : 8982 - 1991

(s)

 

Resistance to heat (after air drying for 48 Hrs.) Except for White Paint

No sign of cracking, blistering or appreciable change of colour at 150 C for 2 Hrs.

Pt 7/Sec 3 Panels exposed at 150 C for 2 Hours.

(t)

 

Resistance to warm water (45 + 3 C for 4 Hrs.)

No fading or change of colour

Annexure_E of IS : 8982-91

(u)

 

Resistance to Salt Spray (for 96 Hours)

There shall be no blistering, loss of adhesion or corrosion Extending more than 1.25 cm On either side of the Scratch.

IS : 101 : Part 6 Sec 1 : Clause 3 Netural Salt Spray Test.

(v)

 

Natural out door Weathering (QUV 313)

To withstand 500 Hrs. exposure the condition of the paint film shall be as under :

(i) Colour

Not more than slight change

(ii) Condition of Coation

No cracking, flaking, checking, chalking of paint film and no corrosion of metal surface.

 

Note : Composition & Flash Point of suitable thinner may be intimated.

Home | Sitemap

 

All rights reserved to Indian Paint Association. Site designed and developed by : echo